Nm-6166 low temperature resistant - 200 ℃ glue

[product features]

1. This product is an ultra-low temperature resistant epoxy resin adhesive, which can work in liquid nitrogen environment for a long time;

2. It can be cured at low temperature or normal temperature with fast curing speed;

3. The cured product has good acid-base resistance, moisture-proof, waterproof, oil-proof and dust-proof performance, and is resistant to damp heat and atmospheric aging;

4. The cured product has good electrical and physical properties such as insulation, compression resistance, high bonding strength, etc.

[scope of application]

1. All electronic or other products requiring rapid bonding and fixation can be used;

2. It is widely used in the bonding and fixation of electronic components, handicrafts and gifts. It has excellent bonding strength for the packaging and bonding between metals, ceramics, wood, glass and hard plastics;

[product name and model]

Product model A / B ratio A glue color B glue color Available time Curing time

NM-6166AB 2:1 Light yellow transparent Water clear 30 Minutes 24 hours [usage]

1. The parts to be bonded and sealed shall be kept dry and clean;

2. Take the amount according to the proportion. After mixing agent a and agent B, fully stir them evenly to avoid incomplete curing;

3. After mixing evenly, please inject glue in time and try to use the mixed glue within the available time;

[characteristics after curing]

Hardness (Shore D) ≥ 70 water absorption (25 ℃% 24h) < 0.15

（GB/T 6739-96） (GB/1034-70)

Compressive strength (kg / mm2) ≥ 50 shear strength (steel / steel) (kg / mm2) ≥ 13

(GB/6328—1986) (GB／T7124—1986)

Tensile strength (steel / steel) (kg / mm2) ≥ 22 temperature resistance range – 320 ℃ - 150 ℃

(GB／T7124—1986) (GB/1035-70)

Volume resistance (25 ℃ ohm cm) ≥ 1.35 × 1015 surface resistance (25 ℃ Ohm) ≥ 1.2 × one thousand and fourteen

Withstand voltage (25 ℃ kV / mm) ≥ 16 ~ 18 dielectric constant (1kHz) 3.8 ~ 4.2

[precautions]

1. This product will start to solidify after mixing, and its viscosity will rise quickly and release heat;

2. Note: the curing speed of this product is very fast. Please reduce the amount of glue at one time as much as possible! The more glue is mixed together, the faster the reaction will be, the faster the curing speed will be, and a large amount of heat may be released. Please pay attention to control the amount of glue prepared at one time, because the usable time will be shortened due to the accelerated reaction, and the mixed glue will be used up in a short time as far as possible;

3. A very small number of people will have mild skin allergy and slight itching when contacting the glue solution for a long time. It is recommended to wear protective gloves when using. Wipe off the adhesive on the skin with acetone or alcohol and clean it with detergent;

4. Before large-scale use, please try a small amount first to master the use skills of the product to avoid mistakes.

[storage and packaging]

5. The product shall be sealed and stored in a ventilated, cool and dry place with a shelf life of 12 months. After expiration, it can be used again after passing the test;

6. The package specification is 25 for each group, including 20kg / barrel of main agent and 5kg / barrel of curing agent.