Resistance to ultra-low temperature epoxy resin adhesive
NM-6166 specification
【Features】
1. This product is resistant to ultra-low temperature series of epoxy resin adhesive, long-term work in the liquid nitrogen environment;
2. Can be low temperature or room temperature curing, curing speed;
3.Cured acid and alkali resistance, moisture-proof waterproof, dust-proof performance of good oil, moisture-resistant and atmospheric aging;
4.Cured with good insulation, compression, bonding strength and other electrical and physical properties.
【Application】
1. This product is used for fast bonding fixed electronic or other products;
2. Widely used in electronic components and crafts, gift bonding fixed for metal, ceramics, wood, glass and rigid plastic packaging between the adhesive, with excellent bonding strength;
【Main parameter】
| Model No. | Ratio of A and B | Color of part A | Color of part B | Operating time | Curing time |
| NM-6199 | 2:1 | Clear light yellow | transparent | 50-90mins | 24 hour |
【How to use】
1. keep dry and clean for the parts of things need to bonding;
2. According to the proportion of taking, A, B agent should be fully mixed even after mixing to avoid curing is not complete;
3. After stirring evenly, please inject glue in time, and try to use the mixed glue within the usable time;
【Data sheet(after cured)】
Hardness（Shore D）≥70 Water absorption（25℃ %24小时）<0.15
（GB/T 6739-96） (GB/1034-70)
Compressive strength（kg/mm2） ≥50 Shear strength (steel / steel) (kg/mm2) ≥13
(GB/6328—1986) (GB／T7124—1986)
Tensile strength (steel / steel) (kg/mm2) ≥22 Temperature range –273℃~120℃
(GB／T7124—1986) (GB/1035-70)
Volume resistance (25℃ Ohm-cm) ≥1.35 ×1015 Surface resistance (25℃ Ohm) ≥1.2×1014
Dielectric resistance (25℃ Kv/mm) ≥16~18 Dielectric constant(1KHZ) 3.8~4.2
【Warnings】
1. This product will start curing after mixing, the viscosity will soon rise, and will release heat;
2. Note: The product is fast curing, please minimize the amount of plastic with a time! The more glue mixed together, the reaction will be faster, the curing speed will be faster and may be accompanied by the release of a lot of heat, please note that the amount of control with a plastic, because the reaction to speed up its use of time Will shorten, after mixing the glue as far as possible within a short time;
3. There are very few people a long time contact with glue will have mild skin allergies, mild itching, it is recommended to wear protective gloves, stick to the skin, please use acetone or alcohol to wipe, and use cleaners to clean;
4. In a large number of use, please a small amount of trial, master the use of product skills, so as not to error.
【Storage and package】
1. This product must be ventilated, cool, dry place sealed preservation, shelf life of 12 months, expired by the test qualified, can continue to use;
2. Packing specifications for each group 3KG, which contains the main agent 2kg / barrel, curing agent 1 kg / barrel.
Telephone：+86-755-23003866
