5分钟快干环氧树脂
Mixing ratio: A:B=1:1
Work temperature: -50℃-120℃
Curing time : 5min
Color: Transparent (color adjustable)
Hardness: ≥80
Specification: 50ml/pc , (50pcs/ctn)
Origin : Shenzhen
【Features】
1. This product is a fast curing series, transparent viscous epoxy resin adhesive;
2. It can be cured at low temperature or normal temperature with fast curing;
3. After curing, the bonding strength is high, the hardness is good, and there is a certain toughness;
4. The cured product has good acid-alkali resistance, moisture-proof, water-proof, oil-proof and dust-proof performance, resistance to damp heat and atmospheric aging;
5. The cured product has good insulation, compression resistance, and high bonding strength.
How to use?
01 Prepares materials /
02 90 degree rotation to remove the cover /
03 Install the glue gun and mixing tube /
04 Extruded glue
【Warnings】
1. This product will start curing after mixing, the viscosity will soon rise, and will release heat;
2. Note: The product is very thick, it is recommended to use before the packaging cans into the hot water for 10-20 minutes, so that increased viscosity decreased mobility, the product curing speed, please minimize the amount of time with plastic! After mixing the glue as far as possible in a short time End;
3. There are very few people a long time contact with glue will have mild skin allergies, mild itching, it is recommended to wear protective gloves, stick to the skin, please use acetone or alcohol to wipe, and use cleaners to clean;
4. In a large number of use, please a small amount of trial, master the use of product skills, so as not to error.
Telephone：+86-755-23003866
